crwdns2915892:0crwdne2915892:0
Use this guide to remove the Moto E4 motherboard cover. Doing so allows access to the front facing camera, the rear facing camera, and the motherboard.
crwdns2942213:0crwdne2942213:0
- 
   
   - 
                     
            Remove the plastic cover by gently prying it up from the notch at the bottom right corner of the phone. 
- 
                     
            With the phone face down, lift the battery up by the labeled tab and remove it from the device. 
 
- 
                     
            
- 
                     
                                                
- 
   
   - 
                     
            Remove all nine 4mm screws from the top plastic cover with a Phillips driver. 
 
- 
                     
            
- 
   
   - 
                     
            Gently pry up the plastic cover from the gap between it and the phone edge. 
- 
                     
            Start on the right side as indicated by the first picture. 
- 
                     
            Continue prying around the rest of the cover in a counter clockwise path. 
- 
                     
            Once loose, remove the plastic cover from the phone. 
 
- 
                     
            
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:02crwdne2935229:0
