crwdns2915892:0crwdne2915892:0
If you are hearing any high-pitched noises or having any suction issues while using the floor brush attachment, you may have a loose motor connection to the floor brush. The motor in the floor brush attachment of the vacuum powers the floor brush and the suction. Here is a guide on how to replace the motor in the Moosoo XL-618A vacuum.
crwdns2942213:0crwdne2942213:0
-
-
Remove the eight 11 mm screws on the bottom of the vacuum with the Phillips #1 screwdriver.
-
-
-
Pull the two hard plastic covers off of the floor brush piece.
-
-
-
-
Remove the 9 mm screw to the motor with the Phillips #1 screwdriver.
-
-
-
Take the motor and floor brush out of their slot and pull the floor brush off of the motor.
-
-
-
Remove the two 9 mm screws with the Phillips #1 screwdriver and pull the plastic piece off of the motor.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:02crwdne2935229:0
crwdns2947410:01crwdne2947410:0
Thank you what a huge help you've been plus I believe you saved me money because I was at the point of giving up until I found this. Bless you, and Happy Holidays to you and your family. Cheers! Sincerely
, Duke G.