crwdns2915892:0crwdne2915892:0
The floor brush is the cylindrical brush on the bottom of the Moosoo XL-618A vacuum. The floor brush is what picks up the dirt and debris on the floor when vacuuming. It also keeps the air floor close to the ground so not dust gets further up in the air. Here is a guide to replace the floor brush.
crwdns2942213:0crwdne2942213:0
-
-
Remove the eight 11 mm screws on the bottom of the vacuum with the Phillips #1 screwdriver.
-
-
-
Pull the two hard plastic covers off of the floor brush piece.
-
-
-
-
Pull the motor and floor brush attachments out of their slot.
-
-
-
Pull the floor brush off of the motor.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.