crwdns2894164:0crwdne2894164:0

crwdns2890822:0crwdne2890822:0

crwdns2890844:0crwdne2890844:0

crwdns2861143:0crwdne2861143:0

crwdns2892376:0crwdne2892376:0

Use this guide to replace the front speaker grille

crwdns2860947:0crwdne2860947:0

crwdns2890040:0crwdne2890040:0

  1. Use a spudger or your fingers to pry off and remove the rubber pad on the bottom of the speaker. Use a spudger or your fingers to pry off and remove the rubber pad on the bottom of the speaker.
    • Use a spudger or your fingers to pry off and remove the rubber pad on the bottom of the speaker.

  2. Remove the five 10mm screws with a TR 10 screwdriver. Use a spudger to break the remaining adhesive holding the grille to the speaker body. Be sure you don't bend the grille; it is not free from the speaker yet.
    • Remove the five 10mm screws with a TR 10 screwdriver.

    • Use a spudger to break the remaining adhesive holding the grille to the speaker body.

    • Be sure you don't bend the grille; it is not free from the speaker yet.

  3. Flip speaker around and use a plastic opening tool to remove the top panel from the speaker.
    • Flip speaker around and use a plastic opening tool to remove the top panel from the speaker.

  4. Use a plastic opening tool to remove the foam and uncover four more screws. Use a TR 10 screwdriver to remove the five 10mm screws on the top of the speaker. Use a TR 10 screwdriver to remove the five 10mm screws on the top of the speaker.
    • Use a plastic opening tool to remove the foam and uncover four more screws.

    • Use a TR 10 screwdriver to remove the five 10mm screws on the top of the speaker.

  5. Carefully remove the top cover. Be careful not to tear or stress the cable that provides power to the power LED.
    • Carefully remove the top cover.

    • Be careful not to tear or stress the cable that provides power to the power LED.

  6. Use a TR 10 screwdriver to remove two of the 10mm screws that secure the speaker grille. Do not attempt to remove the grille just yet.
    • Use a TR 10 screwdriver to remove two of the 10mm screws that secure the speaker grille.

    • Do not attempt to remove the grille just yet.

  7. With the top panel removed, use a spudger to remove the display panel. The clips on the display panel are quite fragile. Pry up both edges of the display before attempting removal. Use a TR 10 screwdriver to remove the four final 10mm screws securing the speaker grille.
    • With the top panel removed, use a spudger to remove the display panel.

    • The clips on the display panel are quite fragile. Pry up both edges of the display before attempting removal.

    • Use a TR 10 screwdriver to remove the four final 10mm screws securing the speaker grille.

  8. Remove the front speaker grille.
    • Remove the front speaker grille.

crwdns2892372:0crwdne2892372:0

To reassemble your device, follow these instructions in reverse order.

crwdns2878426:02crwdne2878426:0

Shaw Hughes

crwdns2886885:030/01/2017crwdne2886885:0

678 crwdns2894548:0crwdne2894548:0

crwdns2886889:05crwdne2886889:0

crwdns2892814:0crwdne2892814:0

Cal Poly, Team 21-5, Maness Winter 2017 crwdns2886886:0Cal Poly, Team 21-5, Maness Winter 2017crwdne2886886:0

CPSU-MANESS-W17S21G5

crwdns2858115:04crwdne2858115:0

crwdns2886889:06crwdne2886889:0

crwdns2892924:00crwdne2892924:0

crwdns2892926:0crwdne2892926:0

crwdns2894754:0crwdne2894754:0:

crwdns2894766:024crwdne2894766:0 0

crwdns2894768:07crwdne2894768:0 1

crwdns2894768:030crwdne2894768:0 9

crwdns2894770:0crwdne2894770:0 224