crwdns2915892:0crwdne2915892:0
An easy workflow to replace the battery of your TicWatch C2 , by yourself
-
-
With a sharp and thin object, press and open the plastic shell, equipped with the charging connectors, upwards. It is attached with glue , to facilitate , it can also be heated. Do not completely remove the shell but lift it because the connector is attached to the mainboard.
-
-
-
Lift the plastic cover and disconnect the charging connector from the mainboard.
-
-
-
-
Disconnect the other 4 connectors that remain to remove the battery and mainboard block.
-
-
-
Remove mainboard and battery block from display front housing
-
-
-
With a philips screwdriver remove the two screws that hold the mainboard and the battery to the plastic shell.
-
-
-
The battery is held on the mainboard with little glue.Easy to remove
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935227:0crwdne2935227:0
