crwdns2915892:0crwdne2915892:0
This guide will show you how to replace the back clock button for your Minolta Maxxum STsi.
crwdns2942213:0crwdne2942213:0
- 
   
   - 
                     
            Open the back panel by firmly pressing up on the back-cover release on the lower right side of the camera. 
 
- 
                     
            
- 
   
   - 
                     
            Remove the black case by gently lifting it with your fingers and rotating counterclockwise. 
 
- 
                     
            
- 
                     
                                                
- 
   
   - 
                     
            Remove the five black Phillips #00 2.5 mm screws from the back panel. 
- 
                     
            Also remove the two black Phillips #00 5.0 mm screws from the back panel. 
 
- 
                     
            
- 
   
   crwdns2935267:0crwdne2935267:0Tweezers$4.99- 
                     
            Use the tweezers to carefully peel back the adhesive foam connecting the back panel to the case and remove the panel. 
 
- 
                     
            
- 
   
   - 
                     
            Use the tweezers to carefully peel off the rubber clock button. 
 
- 
                     
            
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
