crwdns2915892:0crwdne2915892:0
The back panel of the Milwaukee Circular Saw 263020 B57A 2008 is needed to access the internal parts of the device. If there is damage exposing electronics or a need to replace internal parts please refer to this guide to remove your back panel.
crwdns2942213:0crwdne2942213:0
-
-
Orient your saw sideways so that the blade is facing downwards.
-
-
-
-
Remove the nine 6 mm screws using a Torx T4 screwdriver.
-
Remove the single 8 mm screw at the bottom that attaches the panels together using a Torx T6 screwdriver.
-
Slowly pull and remove the front panel of the saw that connects to the blade side with your hand, and separate it from the motor.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2915084:0crwdne2915084:0
University of North Texas, Team 4-8, Harold Fall 2023 crwdns2935289:0University of North Texas, Team 4-8, Harold Fall 2023crwdne2935289:0
UNT-HAROLD-F23S4G8
crwdns2931471:03crwdne2931471:0
crwdns2935297:05crwdne2935297:0
