crwdns2915892:0crwdne2915892:0
To replace the Surface 3 audio jack, you will need to remove the casing, undo various restraints that keep the audio jack in place, and, finally, remove and replace the audio jack itself.
crwdns2942213:0crwdne2942213:0
-
-
Warm up an iOpener following the instructions found in the iOpener guide.
-
Place the warm iOpener on top of the edges of the screen. This heat will weaken the strength of the adhesive between the display and body.
-
-
-
Use iFixit opening picks to wedge under the edge of the screen at the speaker port.
-
-
-
Carefully try to work your way around the device using the picks, reapplications of the heated iOpener, and luck.
-
-
-
Flip the display over so that parts underneath it are easily accessible.
-
-
-
-
You will be working in this area of the Surface 3 when replacing the audio jack and Micro SD port
-
-
-
Remove the black adhesive covering next to the audio jack in order to get to the screws underneath.
-
-
-
Remove the silver bracket using the black pick in order to properly remove the entire audio jack.
-
-
-
Remove the two 3/16" Torx #2 screws directly beside the audio jack.
-
-
-
Remove the two 1/16" Torx #3 screws that hold in the MicroSD slot.
-
-
-
Carefully remove the entire audio jack . It should look like the picture of the single part to the left.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:04crwdne2935229:0
crwdns2915084:0crwdne2915084:0
Cal Poly, Team 5-12, Maness Fall 2015 crwdns2935289:0Cal Poly, Team 5-12, Maness Fall 2015crwdne2935289:0
CPSU-MANESS-F15S5G12
crwdns2931471:04crwdne2931471:0
crwdns2935297:022crwdne2935297:0
crwdns2947412:02crwdne2947412:0
Hi,
What is microsd bus interface? UHS-1 or UHS-2
Or at least, does it have any manufacturer info on it?
Hi Guys,
Do you know where can I buy mini display port mounted on motherboard? I need aprox 100pcs.
