crwdns2942213:0crwdne2942213:0
-
-
Switch off the phone.
-
Remove the battery and any inserted SIM and memory cards.
-
Use a screwdriver Torx T6 and remove the 4x black screws.
-
-
-
There are several plastic locking clips hold the back cover to the frame.
-
Use a tool with a sharp edge to unlock them and a plastic tool to separate the back cover.
-
-
-
Unhook:
-
the touch screen flex cable
-
the LCD Display flex cable
-
Use a plastic tool lift up and remove the Logic board.
-
-
-
-
This is the logic board / main board - a front and rear view.
-
-
-
The Display metal shield is locked to the frame by 4x locking clips.
-
Use a tool with a sharp tip and careful unlock them and remove the shield.
-
-
-
The display is stuck tovthe touch screen glass with a double-sided adhesive tape.
-
Use a hair dryer or hot air gun and worm the glass to make adhesive soften.
-
-
-
The display is very fragile, do the separation very carefully.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935227:0crwdne2935227:0