crwdns2915892:0crwdne2915892:0
This guide will show you how to properly replace the speaker for the the Mattel Loopz interactive game.
crwdns2942213:0crwdne2942213:0
-
-
Use a No. 2 Phillips head screwdriver to take out the 1/4" screw that holds the battery cover in place on the bottom of the device.
-
-
-
Remove red screw covers (13 total) using spudger.
-
-
-
Remove the thirteen 12.7mm screws with a #1 Phillips screwdriver.
-
-
-
-
Remove 6 white caps using spudger to reveal screws underneath.
-
-
-
Remove the six 16mm screws with a #1 Phillips screwdriver.
-
-
-
Remove the white cover. Be sure to remove the front and the back.
-
-
-
Remove the black, plastic cover to reveal the internal electronics as shown.
-
-
-
Remove the two 6.4mm screws with a #1 Phillips screwdriver.
-
-
-
Use a soldering iron to desolder the red and black speaker wires from the speaker.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935227:0crwdne2935227:0