crwdns2942213:0crwdne2942213:0
-
-
Remove the two screws using a PH #00 Phillips head screw driver.
-
-
-
Place the device face down on a flat surface.
-
Insert one of the wide tipped, plastic opening tools into the top of the left speaker slot.
-
Pry the back plate open and slide the tool in a clockwise direction, moving it along the opening between the device and its back plate until you reach the power button.
-
-
-
-
Insert opening tool into the right speaker slot.
-
Pry open the back plate, and slide the tool counter clockwise along the device until you reach the charging port.
-
-
-
Remove the back plate and place it to the side.
-
-
-
Remove the screws holding the metal frame plate in place.
-
Remove the metal frame plate from the plastic housing.
-
-
-
Place the metal frame plate and components into the new plastic front panel.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935227:0crwdne2935227:0
crwdns2947410:01crwdne2947410:0
where can you order the front plastic panel from? and how much?