crwdns2942213:0crwdne2942213:0
-
-
Use a Phillips #2 screwdriver to remove the two screws on the top of the device toward the back.
-
-
-
Remove the plastic cover by lifting up the back and pulling it away from the faceplate.
-
-
-
Unclip the three latches on the bottom of the device.
-
-
-
-
Use a Phillips #2 screwdriver to remove the two screws at the base of the disk drive.
-
-
-
Use the screwdriver to remove two screws on either side of the silver security bar.
-
-
-
Pull out the silver security bar and set aside.
-
-
-
Take out the two screws on either side of the green circuit board.
-
-
-
Carefully lift the board just enough to remove the disk drive.
-
-
-
Remove the two screws at the back of the disk drive.
-
-
-
Gently lift the disk drive out of the DVD player.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2947410:01crwdne2947410:0
This also works with the SV2000 WV205 dvd player.
-Franklin