crwdns2915892:0crwdne2915892:0
If your device won't turn on , you can access or replace the battery by using this guide. Also , make sure you have clean open place to work with. Make sure you have all the tools including the glue, which holds the battery to the panel.
crwdns2942213:0crwdne2942213:0
-
-
Unscrew four Phillips #0 screws from the back panel.
-
-
-
Unscrew two Phillips #0 screws from the back panel.
-
-
-
-
Use a plastic opening tool to pop the right side of the panel.
-
-
-
Remove the tape.
-
Unplug the cable for the speaker.
-
-
-
Place the back panel gently on the table.
-
-
-
Remove the battery by using the IFIXIT plastic tool.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.