crwdns2915892:0crwdne2915892:0
This guide will show you how to replace the Mid Wall on from your laptop.
crwdns2942213:0crwdne2942213:0
-
-
With the case closed, place the Unibody top-side down on a flat surface.
-
Depress the grooved side of the access door release latch enough to grab the free end. Lift the release latch until it is vertical.
-
-
-
The access door should now be raised enough to lift it up and out of the Unibody.
-
-
-
Grab the white plastic tab and pull the battery up and out of the Unibody.
-
-
-
-
Remove the following eight screws securing the lower case to the chassis:
-
One 3 mm Phillips screw.
-
Three 13.5 mm Phillips screws.
-
Four 3.5 mm Phillips screws.
-
-
-
Using both hands, lift and remove the lower case off the upper case.
-
-
-
Remove the four 10.3 mm Phillips screws securing the mid wall to the upper case.
-
-
-
Lift the mid wall out of the upper case.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:07crwdne2935229:0