crwdns2915892:0crwdne2915892:0
Prerequisite-only guide to slide the logic board and attached components out of the Mac mini's chassis.
crwdns2942213:0crwdne2942213:0
-
-
Grasp the power supply cable and lift to disconnect it from the logic board, wiggling as needed to loosen it up.
-
-
-
Carefully lift the connector for the LED indicator light straight up to disconnect it from its socket on the logic board.
-
-
-
-
Use a T10 Torx driver to remove the two 7.5 mm screws securing the logic board.
-
-
-
Place a thumb at each end of the exhaust vent, over the fan screw holes.
-
Push firmly in the direction of the ports until the logic board unclips and begins to slide out of the Mac mini.
-
-
-
Slide the logic board out of the case.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.