crwdns2915892:0crwdne2915892:0
Prereq only.
crwdns2942213:0crwdne2942213:0
-
-
Remove five 5.1 mm T10 Torx screws from around the outer perimeter of the fan assembly.
-
-
-
Tilt the assembly up away from the IO board.
-
-
-
-
While supporting the fan assembly with one hand, loosen the two T8 captive screws in the fan cable bracket.
-
-
crwdns2935267:0crwdne2935267:0Tweezers$4.99
-
Use a pair of tweezers to pull the fan cable bracket away from the fan assembly.
-
-
-
Use the flat end of a spudger to disconnect the fan assembly ribbon cable from the IO board.
-
-
-
Disconnect the fan assembly antenna cable from the IO board.
-
Remove the fan assembly from the Mac Pro.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.