crwdns2915892:0crwdne2915892:0
Is your wireless card not working? Here's a guide to replace it. Make sure you follow each step accordingly and carefully replace the wireless card.
crwdns2942213:0crwdne2942213:0
-
-
Flip MSI GP60 2PE Leopard, so that the back is facing up.
-
-
-
Find the unlock tab located on the upper right side of the device, then slide it to the right.
-
-
-
Slide and hold the release tab on the left side of the battery, so that you can remove the battery.
-
-
-
While holding the release tab, remove the battery slowly.
-
-
-
-
Flip the device over so the back is facing up.
-
-
-
Remove the four 5mm screws from the back of the device using a Phillips #00 screwdriver.
-
-
-
Once all four screws are removed, lift the back off.
-
-
-
Locate the wireless card.
-
-
-
Using a Phillips #00 screwdriver, remove the one 2 mm screw that is holding the wireless card in place.
-
-
-
Remove the wires connecting to the wireless card by pinching around the base where they connect, then carefully disconnect them.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:02crwdne2935229:0