crwdns2894164:0crwdne2894164:0

crwdns2890822:0crwdne2890822:0

crwdns2890844:0crwdne2890844:0

crwdns2861143:0crwdne2861143:0

crwdns2892376:0crwdne2892376:0

The Optical Drive replacement is easy, just a note though, our Optical Drive did not come with the bezel attached. When the drive has the bezel attached the back panel does not have to come off. Instead a single screw on the back panel would be removed and the drive would slide out.

crwdns2860947:0crwdne2860947:0

crwdns2890040:0crwdne2890040:0

  1. Make sure the laptop is off and unplugged (not charging). With the laptop closed and upside down, unscrew the nineteen 5.5mm Phillips #1 screws that keep the back cover in place.
    • Make sure the laptop is off and unplugged (not charging).

    • With the laptop closed and upside down, unscrew the nineteen 5.5mm Phillips #1 screws that keep the back cover in place.

  2. Using your fingers, gently loosen the edges of all four sides of the back cover. Gently pull off the back cover.
    • Using your fingers, gently loosen the edges of all four sides of the back cover.

    • Gently pull off the back cover.

  3. Unscrew the single 5.5mm Phillips #1 screw keeping the battery secure. Unscrew the single 5.5mm Phillips #1 screw keeping the battery secure.
    • Unscrew the single 5.5mm Phillips #1 screw keeping the battery secure.

  4. Grab the battery with your fingers and gently pull it up and away from the rest of the laptop. Grab the battery with your fingers and gently pull it up and away from the rest of the laptop.
    • Grab the battery with your fingers and gently pull it up and away from the rest of the laptop.

  5. Carefully slide the Optical Drive off of the SATA connector. The red marker shows the location for where the retaining screw comes through the back panel to hold the Optical Drive. The red marker shows the location for where the retaining screw comes through the back panel to hold the Optical Drive.
    • Carefully slide the Optical Drive off of the SATA connector.

    • The red marker shows the location for where the retaining screw comes through the back panel to hold the Optical Drive.

crwdns2892372:0crwdne2892372:0

To reassemble your device, follow these instructions in reverse order.

crwdns2878480:0crwdne2878480:0

Riley Smith

crwdns2886885:022/09/2017crwdne2886885:0

644 crwdns2894548:0crwdne2894548:0

crwdns2886889:04crwdne2886889:0

crwdns2892814:0crwdne2892814:0

Central Washington University, Team S1-G2, Pengilly Fall 2017 crwdns2886886:0Central Washington University, Team S1-G2, Pengilly Fall 2017crwdne2886886:0

CWU-PENGILLY-F17S1G2

crwdns2858115:04crwdne2858115:0

crwdns2886889:04crwdne2886889:0

crwdns2892924:02crwdne2892924:0

Why do you have to remove the battery first?

Kevin - crwdns2853112:0crwdne2853112:0

So you don’t have power running through it while working on it.

croberts1290 - crwdns2853112:0crwdne2853112:0

crwdns2892926:0crwdne2892926:0

crwdns2894754:0crwdne2894754:0:

crwdns2894766:024crwdne2894766:0 1

crwdns2894768:07crwdne2894768:0 6

crwdns2894768:030crwdne2894768:0 31

crwdns2894770:0crwdne2894770:0 754