crwdns2942213:0crwdne2942213:0
-
-
Start with the bottom of the laptop facing up.
-
-
-
Remove the 15 screws from the bottom of the laptop with a PH1 screwdriver.
-
Remove the bottom plate by pulling away from laptop
-
-
-
-
Remove the screw holding down the battery with a PH1 screwdriver.
-
Pull out the battery.
-
-
-
Open the laptop up as if you were going to use it.
-
Wedge a spudger in between the screen bezel and work it around to separate it.
-
-
-
Remove the screws holding in the screen at the corners with a PH1 screwdriver.
-
-
-
Remove the bezel from the screen.
-
Remove the two screws located at the bottom of the screen using the PH1 screwdriver.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.