crwdns2915892:0crwdne2915892:0
In this guide we have a MSI Force GC30 V2, model number/name is MSI Force GC30 V2 and we are replacing the D-Pad (Directional Pad). The D-Pad is a directional controller for the controller itself or it could also be used for various other inputs. The D-Pad may become damaged with prolonged use or rough play. The MSI Force GC30 V2 also has an alternate D-Pad that comes with the controller you can use with this guide. One symptom of a bad D-Pad is no game input when pressing the D-Pad.
crwdns2942213:0crwdne2942213:0
-
-
Puncture the sticker where indicated using a screwdriver.
-
Remove the 9.1 mm-long Phillips #0 screw.
-
Remove the remaining six 9.2 mm-long Phillips #0 screws with a Philips #0 screwdriver.
-
-
-
Insert an opening pick in the gap between the front and rear case.
-
Slide the pick around the perimeter of the controller while prying.
-
Once the rear case is released, gently pull it away from the front case.
-
-
-
Use blunt tweezers to disconnect both of the vibration motor connectors from the motherboard.
-
Carefully remove both the right and left vibration motors from their housing.
-
-
-
-
Remove the 7.1 mm-long screw with a Phillips #0 screwdriver.
-
Remove the 7 mm-long screw with a Phillips #0 screwdriver.
-
Carefully lift the motherboard out of its housing.
-
-
-
Remove the rubber button membrane from the motherboard.
-
-
-
Remove the D-pad from the front case.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935227:0crwdne2935227:0
crwdns2915084:0crwdne2915084:0
University of Memphis, Team 1-4, Sneed Spring 2024 crwdns2935289:0University of Memphis, Team 1-4, Sneed Spring 2024crwdne2935289:0
UM-SNEED-S24S1G4
crwdns2931471:04crwdne2931471:0
crwdns2935297:06crwdne2935297:0
