crwdns2915892:0crwdne2915892:0
The Logitech UE Boombox has two tweeter speakers that may need replacement due to use over time. They are essential for receiving high quality sound.
crwdns2942213:0crwdne2942213:0
-
-
Use a metal spudger to pry open the power button cover.
-
Once the power button cover is slightly opened, use your fingers to remove the power button cover.
-
-
-
Press firmly on the end of the latch and pull the two-wire connector away from the base to separate.
-
-
-
Firmly press on the end of the latch and pull the four-wire connector away from the base to separate.
-
-
-
Lightly, pry up on each side of the black band connector lock using your fingertips.
-
Once unlocked, pull straight up on the connector to remove.
-
-
-
Remove the five black 14mm Phillips #2 screws from the black plastic side panel.
-
Remove the one silver 16mm Phillips #2 screws from the black plastic side panel.
-
Remove the black plastic screw panel from the boombox.
-
-
-
On the opposite side of the device, pry open the volume rocker with a metal spudger.
-
Remove the panel with your fingers once the volume rocker is slightly opened.
-
-
-
Remove the five black 14mm Phillips #2 screws from the black plastic side panel.
-
Remove the one silver16 mm Phillips #2 screw from the black plastic side panel.
-
Once all screws are removed, take the screw panel out of the device to gain access to the back of the panel.
-
-
-
-
Firmly press on the end of the latch and pull the two-wire connector away from the base.
-
-
-
Pull up on the aluminum boombox handle to remove.
-
-
-
Use a metal spudger to pry the rubber base apart from the aluminum grille.
-
-
-
Pull the rubber base away from the boombox.
-
-
-
Remove the four black 7.5mm Phillips #2 screws on each side of the device.
-
-
-
Pull vertically on the speaker grille to remove it from the boombox.
-
-
-
Remove the fifteen 13.0 mm Phillips #2 screws from the side of the device containing two speakers.
-
Separate the two halves by gently pulling them apart.
-
-
-
Remove the two 7.0 mm screws Phillips #2.
-
-
-
Using flat-head Tweezers lift tweeter speaker at an angle by the black connecting wire.
-
Desolder the black connecting wire using the Soldering Iron.
-
-
-
Hold the tweeter speaker by the newly disconnected end using flat-head Tweezers.
-
Simultaneously unsolder the thin silver wire using the Soldering Iron while lifting tweeter speaker away from the device using flat-head Tweezers.
-
-
-
Remove the two 7.0 mm screws with a Phillips #2.
-
-
-
Unsolder the black connecting wire using Soldering Iron.
-
-
-
Hold tweeter speaker by newly disconnected end using flat-head tweezers.
-
Simultaneously unsolder the thin silver connecting wire using soldering iron while lifting tweeter speaker away from device using flat-head tweezers.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:03crwdne2935229:0
crwdns2915084:0crwdne2915084:0
CSU Fullerton, Team 1-1, Bruce Fall 2016 crwdns2935289:0CSU Fullerton, Team 1-1, Bruce Fall 2016crwdne2935289:0
CSUF-BRUCE-F16S1G1
crwdns2931471:04crwdne2931471:0
crwdns2935297:05crwdne2935297:0
crwdns2917034:0crwdne2917034:0
Could you recommend anywhere to find the correct replacement tweeters & drivers?
