crwdns2915892:0crwdne2915892:0
The Harmony Hub acts as a middle-man between devices and the remote. It has very few parts, making it a simple fix. The most difficult part of this guide is revealing the hub after removing the screws on the exterior. Once the hub is open, removing the motherboard requires just a few more screws to be removed and the release of a small tab that keeps the motherboard in place.
crwdns2942213:0crwdne2942213:0
-
-
Peel off the rubber pads.
-
Remove the four 6mm Phillips #0 screws from the bottom of the hub.
-
-
-
-
Use a plastic opening tool to remove the top shell of the device.
-
-
-
Remove the single 6 mm Phillips #0 screw from the motherboard.
-
Pull the black tabs back and lift the motherboard.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
