Logitech Harmony Smart Keyboard Back Panel
crwdns2915892:0crwdne2915892:0
crwdns2942287:0crwdne2942287:0This is a prerequisite guide that will instruct you on how to properly open your keyboard. This will be helpful for replacing internal components without damaging your device.
crwdns2942213:0crwdne2942213:0
-
-
Turn keyboard over to the backside.
-
-
-
Press and slide up on the upper battery latch, using both thumbs.
-
-
-
Remove the two AA batteries and set them aside.
-
-
-
Unscrew all five 4.0 mm screws, using Phillips #1 screwdriver.
-
-
-
Peel off the center sticker to reveal two hidden 4.0 mm screws.
-
Unscrew these two screws with a Phillips #1 screwdriver.
-
-
-
Lift both top left and top right rubber stickers halfway, using the sharp end of the plastic spudger.
-
Unscrew a total of two 4.0 mm screws, under the rubber stickers, using a Phillips #1 screwdriver.
-
-
-
Unscrew the top center 4.0 mm screw, in the battery compartment, using the Phillips #1 screwdriver.
-
-
-
Wedge the flat end of the spudger between the back panel and front panel.
-
Slide the flat end of the spudger from right to left to pry the two panels apart.
-
-
-
Separate the back panel from the front panel completely, using both hands.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:02crwdne2935229:0