crwdns2915892:0crwdne2915892:0
If the battery to the remote is not working properly, follow this guide to replace it.
crwdns2942213:0crwdne2942213:0
-
-
Use the Opening Tool to open the port cover at the bottom of the remote control.
-
Bend the cover back to gain easy access to the screws.
-
-
-
Use the Phillips #0 Screwdriver to remove the (2) two 6mm screws.
-
Pull the bottom cover off of the remote control.
-
-
-
-
Use the Phillips #1 Screwdriver to remove the (2) two 6mm screws.
-
There should be a gap on each side to fit the Opening Tool. Use the Opening Tool to open the back cover (Soft Touch cover) using the gap.
-
-
-
Use the Opening Tool to lift the battery out of the case.
-
Gently pull the cable out of the socket to unplug the battery.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:08crwdne2935229:0
crwdns2947412:03crwdne2947412:0
And where to buy these batteries?
Still no batteries for this unit? Maybe Amazon?
|Just checked, and batteries are available on Amazon from several vendors. Mine is on its last legs, so I have ordered one.