crwdns2915892:0crwdne2915892:0
Before you proceed with this guide, you should know how to remove the back cover.
crwdns2942213:0crwdne2942213:0
-
-
Remove the two Phillips #000 screws.
-
-
-
Use a plastic iFixit opening tool to pry the edges of the back case loose by placing it in between the edge of the cover and the screen.
-
-
-
Use the spudger to reach into the center of the device and pry off the back case by giving it a light force upwards.
-
-
-
crwdns2935267:0crwdne2935267:0Tweezers$4.99
-
Remove the headphone jack cover with tweezers by grabbing it and pulling directly up and away from the device.
-
-
-
Remove the two 3.5mm screws using the Phillips #00 Screwdriver.
-
-
-
Disconnect the headphone jack from the motherboard by placing the spudger in between the connections and motherboard and pushing up towards you.
-
Pull the wire towards the headphone jack to disconnect it.
-
-
-
Use tweezers to remove the headphone jack by pulling it up and towards you.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935227:0crwdne2935227:0