crwdns2915892:0crwdne2915892:0
This guide includes all the steps, tools, and parts necessary to disassemble the Lenovo Yoga C930-13IKB to access and replace the fingerprint reader.
crwdns2942213:0crwdne2942213:0
-
-
Flip the device over so that the underside is facing up.
-
Remove the six 3.5 mm T5 Torx screws.
-
-
-
Pry off the back cover using the plastic opening tool.
-
Loosen the back cover in multiple spots using the opening tool, then remove the whole back.
-
-
-
Carefully lift the cover off with your hands.
-
-
-
-
Unplug the battery from the motherboard by pinching the cables with your fingers and tugging out with force.
-
-
-
Unscrew the four 3mm screws with a Phillips screwdriver.
-
-
-
Use your fingers to pry up the clear plastic pull-tab for one of the stretch release adhesives.
-
Grasp the pull-tab and slowly pull away from the battery at a shallow angle. The adhesive strip will stretch to many times its length and slowly release from underneath the battery.
-
Repeat the procedure for the second strip on the opposite side of the battery.
-
Remove the battery with your hands.
-
-
-
Remove the single 2 mm screw from the fingerprint reader cover plate using the Phillips #00 screwdriver.
-
Gently lift and slide out the cover plate using a pair of angled ESD tweezers.
-
-
-
Using the angled ESD tweezers, gently lift the black tab on top of the ZIF connector on the fingerprint reader.
-
Gently pull the ribbon cable out from the connector using the tweezers.
-
-
-
Lift and remove the fingerprint reader from the laptop using the angled ESD tweezers.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2915084:0crwdne2915084:0
The Citadel Military College of South Carolina, Team 2-14, Eggleston Fall 2021 crwdns2935289:0The Citadel Military College of South Carolina, Team 2-14, Eggleston Fall 2021crwdne2935289:0
CMCSC-EGGLESTON-F21S2G14
crwdns2931471:03crwdne2931471:0
crwdns2935297:03crwdne2935297:0
