crwdns2915892:0crwdne2915892:0
This guide will show how to access, disconnect, and remove the hard-disk drive from your Lenovo V15-ADA device.
crwdns2942213:0crwdne2942213:0
-
-
Remove the 10 marked screws using a Phillips #1 screwdriver from the back plate.
-
M2.5 × 7 mm, Phillips-head (6) (RED circles)
-
M2.5 × 4 mm, Phillips-head (4) (ORANGE circles)
-
-
-
After all 10 screws have been removed, insert a spudger between the bottom plate and the housing and slide across.
-
Repeat for all 4 sides until loose.
-
Pop off the back plate and set aside.
-
-
-
To start the removal of the battery, disconnect the ribbon cable connecting the battery to the computer.
-
-
-
-
The battery is held in place by 3 screws. Use the Phillips #0 screwdriver to remove the screws that secure the battery.
-
M2 × 6 mm, Phillips-head, nylok-coated (3)
-
-
-
Remove the battery from the device after completing steps 1 and 2.
-
-
-
Attach a PH0 head onto the screwdriver and remove screw. (M2 × 6 mm, Phillips-head, nylok-coated)
-
-
-
The hard drive has been successfully taken out.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935227:0crwdne2935227:0