crwdns2915892:0crwdne2915892:0
Here, I'll replace the hard disk of my ThinkPad X220 in a few steps.
crwdns2942213:0crwdne2942213:0
-
-
-
You will arrive to something like this.
-
Pull the black tab popping out to remove the HDD from its tray.
-
-
-
Congratulations! You got the HDD out of the laptop. We can now put the laptop somewhere else and focus on the HDD.
-
On each long side of the HDD, two rubber bands are located. Pull them to remove them and access to the screws.
-
-
-
Unscrew the 4 screws located on the two long sides of the drives...
-
...and push the HDD outside from its retention bracket.
-
-
-
You're done! To reassemble, place a new drive in the bracket and follow the steps in the reverse order.
When obtaining a replacement hard drive, be aware that many 2.5" laptop drives, particularly older ones, are too thick (9.5mm) to fit in the X220 drive bay. You need one with a drive height (thickness) of 7mm.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:014crwdne2935229:0
crwdns2947412:05crwdne2947412:0
I just hope that a 64 year old crazy cat lady can do this without blowing up the galaxy
Thanks dude.
What size drives will fit?
7mm thick, no more. (I tried with a thicker HyperX 240gb drive but it was too big, wouldn’t fit)
eine feine Anleitung. Bravo!
