crwdns2915892:0crwdne2915892:0
Is your device turning off unexpectedly or not properly holding a charge? Consider using this guide to replace the battery in your device.
crwdns2942213:0crwdne2942213:0
- 
   
   
- 
                     
            
Make sure to power down and turn off your device before proceeding with the repair.
 - 
                     
            
Flip your laptop over so that the backside is facing you.
 
 - 
                     
            
 - 
   
   
- 
                     
            
Using a Phillips #1 screwdriver, remove the eight screws securing the backplate.
 - 
                     
            
Don’t try to force screws which won't come out. They are held in place by a stopper on the reverse side. This will not prevent you from removing the backplate.
 
 - 
                     
            
 - 
   
   
- 
                     
            
Using the metal spudger, wedge it in the seam where the backplate meets the front plate and run the tool along the seam to separate the backplate.
 
 - 
                     
            
 - 
                     
                                                
 - 
   
   
- 
                     
            
Remove the back panel from the device.
 
 - 
                     
            
 - 
   
   
- 
                     
            
Use the Phillips #1 screwdriver to remove the three screws holding in the battery.
 
 - 
                     
            
 - 
   
   
- 
                     
            
Use the spudger to lift the battery out of it's compartment.
 
 - 
                     
            
 - 
   
   
- 
                     
            
Unclip the battery from the device.
 - 
                     
            
Remove the battery from the device.
 
 - 
                     
            
 
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:04crwdne2935229:0