crwdns2942213:0crwdne2942213:0
-
-
Use a Phillips #0 screwdriver to remove the five 2.7 mm screws on the base cover.
-
-
-
Insert a plastic opening tool between the base cover and the chassis.
-
Slide the tool along the perimeter of the case and push down as you go to release the base cover.
-
Lift the base cover up and off.
-
-
-
Use tweezers to grip the battery's motherboard plug, and pull the plug directly out of its port.
-
-
-
-
Use a Phillips #0 screwdriver to remove the four 5.2 mm screws securing the battery.
-
-
-
Using your hands, remove the battery from the laptop.
-
Lift the battery up and out of its housing.
-
-
-
Use a Phillips #0 screwdriver to remove the single 2.9 mm screw securing the SSD to the motherboard.
-
-
-
Grip the SSD, and gently pull it directly out of its port.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2915084:0crwdne2915084:0
The Citadel Military College of South Carolina, Team 7-9, Eggleston Spring 2022 crwdns2935289:0The Citadel Military College of South Carolina, Team 7-9, Eggleston Spring 2022crwdne2935289:0
CMCSC-EGGLESTON-S22S7G9
crwdns2931471:03crwdne2931471:0
crwdns2935297:03crwdne2935297:0
crwdns2917034:0crwdne2917034:0
I have been building computers for 15+ years, i didn't go to a fancy college but even I know this tutorial is for replacing the SSD or M.2 to be specific for a X390 laptop. this is not the ram module
