crwdns2915892:0crwdne2915892:0
This will take approximately 45 minutes to complete from beginning to end.
crwdns2942213:0crwdne2942213:0
-
-
Close the device and flip it over to expose the back panel.
-
-
-
Use a Phillips #1 screwdriver to unscrew the five captive screws on the back panel until a small pop is heard.
-
-
-
-
Gently wedge an opening tool or spudger under the back panel, and loosen the clips around the perimeter until the back panel comes off.
-
Remove the back cover.
-
-
-
Use tweezers to gently disconnect the two wires that are connected to the Wi-Fi card.
-
-
-
Use a Phillips #1 screwdriver to remove the single screw that secures the Wi-Fi card.
-
-
-
Use tweezers or your fingers to gently pull the Wi-Fi card from its port.
-
Pull directly away from the port, parallel with the card. Do not pull up towards yourself.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:02crwdne2935229:0