crwdns2942213:0crwdne2942213:0
-
-
Start at the microSD slot.
-
Use the opening pick to slide underneath the back cover of the tablet.
-
Slide the opening pick around the tablet until the back cover is off.
-
-
-
Remove the 8 screws with a Phillips #000 screwdriver [bit].
-
There is a screw under the blue "s" sticker.
-
Remove tape holding plate down.
-
Use precision tweezers or your fingers to remove plate.
-
-
-
Remove yellow tape.
-
Use a spudger or plastic opening tool to remove the battery's ribbon cable from the motherboard.
-
-
-
-
Gently pull on the two stretch release adhesive strips. Do not pull up, pull away from battery.
-
Once the tabs are off, lift the battery up from the frame.
-
-
-
Remove 16 screws from the midframe with Phillips #000 screwdriver [bit].
-
-
-
Using an opening pick, find a spot to lift the bracket around the tablet.
-
When the opening pick is inserted between the bracket and tablet, move the pick around the whole tablet to completely detach the bracket.
-
-
-
Desolder the blue and red wires from the motherboard.
-
Once wires are detached, use a metal spudger tool to lift the vibrator.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2915084:0crwdne2915084:0
Purdue University Northwest, Team S2-G4, Hingst Spring 2019 crwdns2935289:0Purdue University Northwest, Team S2-G4, Hingst Spring 2019crwdne2935289:0
PNW-HINGST-S19S2G4
crwdns2931471:05crwdne2931471:0
crwdns2935297:06crwdne2935297:0
