crwdns2915892:0crwdne2915892:0
This guide goes over the steps to remove the front camera from the tablet.
crwdns2942213:0crwdne2942213:0
-
-
Remove the back cover of the tablet by inserting a nylon or metal spudger in the small hole between the screen and rear cover near the volume button. Slide the tool along the edge of the tablet to release the internal clasps.
-
-
-
Unscrew the six 3mm screws surrounding the battery dock using a Phillips #0 screwdriver.
-
-
-
Using a plastic spudger, slowly push each side of the battery connector (back and forward a couple of times) out of its socket on the motherboard.
-
-
-
Remove the battery by prying up with your fingers or a plastic opening tool.
-
-
crwdns2935267:0crwdne2935267:0Tweezers$4.99
-
Remove the red and black connector cable linking the speakers to the motherboard with tweezers by pulling the connector to the left with a light degree of force.
-
-
-
-
Locate the LCD cable connector and gently pry it directly up with a spudger.
-
-
-
Remove the 5 ribbon cables. use the tip of the spudger to flip up the retaining flap, making sure to lift on the hinge and not the connector itself, then remove the cable from the connector.
-
-
crwdns2935267:0crwdne2935267:0Tweezers$4.99
-
Remove the 3 antenna cables using the tweezers by slowly pulling up.
-
-
-
Remove the 4 1.6mm screws with a J0 head.
-
-
-
Remove the red and black cable using the tweezers by gently pulling the connector to the right.
-
-
-
Lift the motherboard out of the tablet's case.
-
-
crwdns2935267:0crwdne2935267:0Tweezers$4.99
-
Disconnect the ribbon cable using the tweezers
-
-
-
Lift the camera up with tweezers to remove it
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:03crwdne2935229:0