crwdns2915892:0crwdne2915892:0
If your computer will not turn on, there may be a problem with the hard drive. This guide will help replace the hard drive in your laptop, and is moderately difficult. Make sure to have a Phillips #0 screwdriver on hand to achieve the steps in this guide.
crwdns2942213:0crwdne2942213:0
-
-
Flip laptop over bottom side up.
-
Locate the two battery release switches.
-
-
-
Use your finger to push the battery release switch labeled "1." The red indicates that the switch is unlocked.
-
-
-
Use your finger to push the battery switch labeled "2."
-
-
-
Once both switches are unlocked, the battery will release.
-
-
-
-
Locate the five black screws on the back.
-
Use a Phillips #0 screwdriver to remove all five black 6 mm screws.
-
-
-
Locate the three silver screws underneath the battery.
-
Use the Phillips #0 screwdriver to remove all three 4 mm screws.
-
-
-
Locate the four rubber stoppers near each corner of the laptop.
-
Open up the stopper with your hands.
-
Use the Phillips #0 screwdriver to remove the 6 mm screws underneath all four stoppers.
-
-
-
Locate the hard drive.
-
Use the Phillips #0 screwdriver to remove the two 4 mm screws that are holding the hard drive in place.
-
-
-
The hard drive is now removed from the laptop.
-
-
-
Once the hard drive is removed, locate the four screws that hold the metal frame to the hard drive.
-
Use the Phillips #0 screwdriver to remove the 4 mm silver screws on all sides.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2915084:0crwdne2915084:0
UC Davis, Team S20-G5, Lore Winter 2019 crwdns2935289:0UC Davis, Team S20-G5, Lore Winter 2019crwdne2935289:0
UCD-LORE-W19S20G5
crwdns2931471:03crwdne2931471:0
crwdns2935297:04crwdne2935297:0
