crwdns2915892:0crwdne2915892:0
Use this guide to replace the front and rear cameras.
crwdns2942213:0crwdne2942213:0
-
-
Look at the back of the tablet and locate the speakers on top of the rear cover.
-
Locate the small indentation in the plastic cover that runs across the top of the device.
-
Wedge the plastic opening tool in this indentation, under the middle of the cover as shown.
-
Pry up and push to remove the cover.
-
-
-
Remove the following two screws:
-
M3.0 x 3.0 mm #00 phillips screws (black)
-
-
-
-
Pry open the front and rear faces using a plastic opening tool.
-
Slide the plastic opening tool to one corner.
-
Place another plastic opening tool into the gap and slide it to the opposite corner as shown.
-
Pull the rear cover up and back to separate it from front face of the device.
-
-
-
Slide the rear camera ribbon from the system board.
-
Pull up on the black plastic lock on the system board for the front camera and slide the ribbon out.
-
Now, you are ready to remove the front and rear facing cameras.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935227:0crwdne2935227:0
crwdns2915084:0crwdne2915084:0
Cal Poly, Team 7-19, Regan Spring 2014 crwdns2935289:0Cal Poly, Team 7-19, Regan Spring 2014crwdne2935289:0
CPSU-REGAN-S14S7G19
crwdns2931471:04crwdne2931471:0
crwdns2935297:015crwdne2935297:0
