crwdns2915892:0crwdne2915892:0
A motherboard replacement is an uncommon procedure, but can oftentimes be a necessary step in fixing your Lenovo IdeaPad Flex4-1130. If you are in need of new RAM or are experiencing trouble with your Lenovo IdeaPad Flex4-1130 and have ruled out other components, a motherboard replacement is an efficient way to refresh your Lenovo IdeaPad Flex4-1130.
crwdns2942213:0crwdne2942213:0
-
-
Remove the ten 4mm screws from the back panel.
-
-
-
Insert the spudger into the groove work your way around the laptop to separate the bottom from the case.
-
-
-
Remove the connector attaching the battery to the motherboard.
-
-
-
Remove the four 4mm screws on the battery.
-
-
-
-
Lift the battery with a spudger and remove.
-
-
-
Remove eleven 6mm screws.
-
-
-
Lift up black flap on the ZIF connector and pull the ribbon cable out.
-
-
-
Lift up on the black tab on the ZIF connector and pull the ribbon cable out.
-
-
-
Remove one last connector cable.
-
Motherboard should now be completely disconnected and can be lifted off the cover to be replaced.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.