crwdns2915892:0crwdne2915892:0
If your Lenovo IdeaPad 330S-15ARR laptop is overheating, making loud disrupting noises, or just not working, follow this guide for step-by-step instructions on how to replace the fan.
crwdns2942213:0crwdne2942213:0
-
-
Remove the ten 3.3 mm screws securing the back panel using a Phillips #00 screwdriver.
-
Use a Jimmy or your fingernail to pry the back panel off.
-
-
-
Remove the six 3 mm screws from the black board using a Phillips #00 screwdriver.
-
Remove the black board.
-
-
-
-
Remove the black electrical tape from the fan.
-
-
-
Disconnect the fan from the circuit board by pulling on the plastic part of the wire towards the fan.
-
-
-
Remove the five 3 mm screws holding the fan in place using a Phillips #00 screwdriver.
-
-
-
Lift the fan to remove it from the laptop.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.