crwdns2915892:0crwdne2915892:0
This does not require any tools. However, be careful to align the notch in the bottom of the RAM module with the notch in the slot it goes in.
crwdns2942213:0crwdne2942213:0
-
-
Turn off the computer, unplug all cables, and let it cool down. Lay the computer flat on its screen.
-
-
-
Remove the monitor stand screw in the bottom of the stand, and remove the stand completely.
-
-
-
Remove the two screws on the bottom of the computer, one on each side.
-
-
-
-
Locate the slot on the right side of the computer next to the screw hole. Use a plastic opening tool or spudger to pry off the rear cover. (Don’t be afraid to use a little force.)
-
-
-
Once it has been separated, lift to remove.
-
-
-
Remove the four screws that secure the arm stand.
-
-
-
Remove the 5 screws that secure the EMI cover.
-
Remove the cover.
-
-
-
Push the two retaining clips away from the RAM sticks.
-
Gently lift up the free side of the RAM module and then pull out of the slot.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:06crwdne2935229:0