crwdns2915892:0crwdne2915892:0
This requires a Phillips head screwdriver. Be careful not to drop the screws into the rest of the computer.
crwdns2942213:0crwdne2942213:0
-
-
Turn off the computer, unplug all cables, and let it cool down. Lay the computer flat on its screen.
-
-
-
Remove the monitor stand screw in the bottom of the stand, and remove the stand completely.
-
-
-
Remove the two screws on the bottom of the computer, one on each side.
-
-
-
-
Locate the slot on the right side of the computer next to the screw hole. Use a plastic opening tool or spudger to pry off the rear cover. (Don’t be afraid to use a little force.)
-
-
-
Once it has been separated, lift to remove.
-
-
-
Remove the four screws that secure the arm stand.
-
-
-
Remove the three screws that secure the fan.
-
-
-
Disconnect the fan power cable from the motherboard, and remove the fan.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2915084:0crwdne2915084:0
Cal Poly, Team S16-G3, Banghart Winter 2018 crwdns2935289:0Cal Poly, Team S16-G3, Banghart Winter 2018crwdne2935289:0
CPSU-BANGHART-W18S16G3
crwdns2931471:04crwdne2931471:0
crwdns2935297:09crwdne2935297:0
