crwdns2942213:0crwdne2942213:0
-
-
Don't let your kids through their water bottles
-
-
-
Long hold the power button or power off from operating system.
-
-
-
Using a small pry bar carefully pop loose the bottom bezel.
-
I started at the hinge as this gave me a place to insert the tool.
-
-
-
-
Under the bezel are three screws. Remove them
-
-
-
using the palm of you hand, box tape, or a suction cup, slide the screen toward the hinge about 3mm.
-
once slid down the catch tabs will be free and the screen will only be connected by fragile wires.
-
-
-
The wires are fragile, take your time.
-
-
-
unplug the wires from the screen, and remove the circuit boards to be installed on the new screen.
-
-
-
the camera is lightly glued and taped into place. Peel back the tape and gently pull the cable free.
-
-
-
Assembly is in reverse order of my steps. The screen is very fragile when not mounted in the frame.
-
make sure the main screen cable has its retaining clip in place.
-
