crwdns2915892:0crwdne2915892:0
The guide will show you how to remove the storage hard drive unit that comes with the laptop. It is compatible with any 2.5" storage solutions like a SSD or HDD.
crwdns2942213:0crwdne2942213:0
-
-
Using the Phillips #0 screwdriver, remove the (11) eleven 5.4 mm screws from the back panel.
-
-
-
Using a plastic opening tool, pull out the back panel from the laptop.
-
-
-
Using the Phillips #0 screwdriver, remove the (2) 5.4 mm screws.
-
Disconnect the battery connector from the motherboard.
-
-
-
-
Pull the battery outward and remove it from the rest of the laptop.
-
-
-
Using the Phillips #0 screwdriver, remove the (3) three 3 mm screws.
-
-
-
Slide the drive away from the connector by applying pressure on the two side tabs where screws were removed. Use a plastic opening tool as a lever to lift the drive out.
-
-
-
Carefully, using your hand, remove the hard drive from the laptop.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:05crwdne2935229:0
crwdns2947412:03crwdne2947412:0
The Edge 2 requires a hard drive of 7mm or less or the bottom cover will not fit properly.
Thank you, was looking everywhere to find that out!!!
Thank you, your help was so useful.