crwdns2915892:0crwdne2915892:0
This guide will show the steps needed to take out and replace the headphone jack in the Lenovo Chromebook 100e 2nd gen. You will need a Phillips head screwdriver and a plastic pick for this guide.
crwdns2942213:0crwdne2942213:0
-
-
Remove the nine 6 mm screws from the back of the laptop using a Phillips #0 screwdriver.
-
-
-
Open the laptop and lay it flat.
-
Go along the edge of the keyboard with an opening tool until it pops loose.
-
-
-
-
Lift the keyboard connectors up using an opening pick.
-
Remove the connectors from their sockets.
-
-
-
Remove the three 4 mm Phillips #0 screws holding the headphone jack in place.
-
-
-
Using a plastic opening pick, remove the connection between the aux port and the speakers.
-
-
-
Using the plastic opening pick, pop the retaining flap holding the ribbon cable in place.
-
Remove the headphone jack from the laptop.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2947410:01crwdne2947410:0
I believe our model has the headphone jack soldered on. Any other ideas?