crwdns2915892:0crwdne2915892:0
In this project proposal, I aim to guide readers through replacing Levi’s leather belt strap. Many people may discard a belt due to a worn or damaged strap, unaware that it can be easily replaced. By offering a step-by-step tutorial, I want to empower readers to save money and extend the life of their belts through simple DIY techniques.
crwdns2942213:0crwdne2942213:0
-
-
Begin by turning the belt buckle around to reveal the screws at the back of the belt.
-
-
-
Take a small screwdriver and begin unscrewing the two screws on both sides of the belt buckle.
-
-
-
Remove the unscrewed belt buckle away from the old leather strap.
-
-
-
Take new leather belt strap and align it with the old leather strap.
-
Take a pen and approximately mark the areas where the cuts will be made.
-
-
-
Take the pen.
-
Draw two circles where the screws will be screwed in.
-
-
-
-
Take the new leather belt strap with markings made.
-
Use a scissor to cut out the square mark on the new leather belt strap.
-
-
-
Take a small screwdriver and puncture the two small circles on the new leather belt strap.
-
-
-
Now, take the front side of the belt buckle and insert it into the front side of the new leather belt strap.
-
If the belt buckle does not fit in, make the markings bigger by cutting away excess leather.
-
-
-
Turn the belt buckle to the back.
-
Take the small screwdriver and the screws.
-
Begin screwing back the screws onto the belt buckle.
-
-
-
Now take the old and new leather belt strap
-
Align both leather belt straps side by side. (The old leather belt strap will be used as a reference)
-
Use a pen to draw circles that are an equal distance apart.
-
-
-
Take the revolving leather puncher.
-
Rotate the setting clockwise to the third or fourth-largest setting. (This will ensure that the buckle's prong will fit through the holes)
-
Now insert the leather puncher and align it with the circle.
-
To punch a hole through the leather, squeeze the handle thoroughly until the leather punch clicks.
-
-
-
THIS STEP IS OPTIONAL
-
Use the pen to draw detail marking to the end of the new leather belt strap.
-
Take the kitchen scissors and cut the leather belt according to the detail.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2915084:0crwdne2915084:0
CSU Los Angeles, Team 8-5, Briggs Spring 2024 crwdns2935289:0CSU Los Angeles, Team 8-5, Briggs Spring 2024crwdne2935289:0
CSULA-BRIGGS-S24S8G5
crwdns2931471:02crwdne2931471:0
crwdns2935303:01crwdne2935303:0
