crwdns2915892:0crwdne2915892:0
During this guide you will take apart the leapfrog and replace the board containing the speaker, audio jack, and directional pad.
crwdns2942213:0crwdne2942213:0
-
crwdns2935267:0crwdne2935267:0Anti-Static Wrist Strap$7.95
-
Before taking apart your device, ensure that it is turned off and that your anti-static wrist strap is secured to a ground.
-
Remove the six 10.0 mm Phillips #0 screws from the outer case and remove the cover with your hands.
-
-
-
Unplug the battery from the motherboard with your hands.
-
-
-
-
Pry the battery gently off of the plastic platform with an opening tool.
-
-
-
Disconnect the audio cord from the motherboard using a plastic opening tool.
-
-
-
Unscrew the five 6.0 mm phillips head screws from the board containing the audio jack and directional pad.
-
-
-
Unscrew the three 6.5 mm phillips head screws holding down the speaker to the right of the audio jack.
-
Remove the board and speaker from the device.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:02crwdne2935229:0
crwdns2947410:01crwdne2947410:0
Where can I purchase a replacement audio board /speaker for the LeapPad3?