crwdns2915892:0crwdne2915892:0
This guide will show you how to replace the joy stick on the controller.
crwdns2942213:0crwdne2942213:0
-
-
Use the Metal Spudger to push the release clip on the battery cover.
-
-
-
The battery holder is now visible with the removal of the cover.
-
-
-
Use the screwdriver to remove the eight 8.7 mm PH1 Phillips head screws.
-
-
-
-
Separate the top and bottom parts of the controller slightly.
-
-
-
Slide the cover on the back side of the controller covering the joy stick out of the way.
-
-
-
Use the screwdriver to remove the four 8.7 mm PH1 Phillips head screws.
-
-
-
Turn and lift the circuit board with button attacked out of the hole. Do not detach the circuit.
-
-
-
Hold the circuit board and button and pull the button off.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.