crwdns2915892:0crwdne2915892:0
This guide will show you how to replace the "A" and "B" buttons on the controller.
crwdns2942213:0crwdne2942213:0
-
-
Use the Metal Spudger to push the release clip on the battery cover.
-
-
-
The battery holder is now visible with the removal of the cover.
-
-
-
Use the screwdriver to remove the eight 8.7mm PH1 Phillips head screws.
-
-
-
-
Slightly lift up on the back cover until the handle covers are free to rotate.
-
-
-
Slide the the side of the handle facing you to the left to reveal the "A" and "B" button circuit board.
-
-
-
Use the screwdriver to remove the three 8.5mm PH1 Phillips head screws.
-
-
-
Lift up on the circuit board and move it to the side.
-
-
-
Use the plastic opening tool to release the buttons from the controller casing.
-
-
-
Remove the "A" and "B" buttons by pulling up on one of the buttons.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935227:0crwdne2935227:0