LG Washing Machine Dispenser Drawer Repair

Have hot, soapy water and a cloth ready for wiping residue and mold.

Wear rubber gloves if detergent residue, mold, or hot water may irritate skin.

Stand in front of the washer and find the detergent dispenser drawer in the top-left corner.

Pull the drawer straight out gently until it reaches the stop.

Look at the back of the open drawer for the release button or clip.

Press down the blue release button to unlock the drawer.

Keep the button pressed and pull the drawer straight out of the washer.

If the drawer has a fabric softener level indicator, lift it up to remove it.

Use a brush with hot, soapy water to scrub mold, detergent residue, and residue from the inside of the drawer.

Wipe the outside of the dispenser tray with the soapy cloth.

Clean until the drawer compartments are free of visible buildup.

Inspect the dispenser drawer cavity before reinstalling the drawer.

Use the soapy cloth to wipe inside the cavity and across the jets at the top.

Use the brush to scrub heavy residue or blocked jets.

Align the drawer with the dispenser cavity.

Slide the drawer straight into the washer until it is fully seated.

Open the washer door and inspect the rubber seal around the inside of the drum.

Use the damp, soapy cloth to clean the rubber folds.

Clear debris from any drainage holes so water can drain properly.

Use the brush to scrub the rubber if it is very grubby.

Close the washer door and dispenser drawer.

Select the 90 °C washing program or the Drum Clean option if the washer has one.

Run the cycle with no clothes to flush residue from the system.