crwdns2915892:0crwdne2915892:0
This guide is for replacing the logic board in your LG VX4500 cell phone.
crwdns2942213:0crwdne2942213:0
-
-
To remove the battery from your LG VX4500, turn the phone so that the back panel is showing.
-
-
-
Pull back on the white release tab and lift up the the entire battery.
-
-
-
-
The back panel should now be fully accessible.
-
-
-
Using a paper clip, remove all 4 rubber screwcaps from the screw ports.
-
With a Phillips head screwdriver, remove all 4 screws from their ports.
-
Also remove the rubber screwcap in the upper part of the back panel along with the screw under it.
-
The fifth screw will be more difficult to get out because the plastic port has much higher sides.
-
-
-
Run a plastic opening tool along the seam to seperate the keyboard cover and the back panel
-
Remove the back panel, now the logic board, keyboard and microphone are exposed.
-
-
-
With your fingers, gently lift up the gold connector until it is completely disconnected.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
