crwdns2915892:0crwdne2915892:0
In this guide we will teach you how to properly remove and replace the flex cable in the LG Tribute HD LS676. The flex cable or cable ribbon is a small delicate cable that is connected to the motherboard. It should be handled cautiously since it can be easily damaged by an applied force.
crwdns2942213:0crwdne2942213:0
-
-
Insert a fingernail, or plastic opening tool, into the cutout on the back cover and pry outward to remove.
-
-
-
Pull the battery out of the phone.
-
Remove the SD Card by sliding the card out as shown.
-
-
-
Remove the twelve 2mm JIS #00 screws from the mid-frame.
-
-
-
Using a plastic opening tool, remove the antenna extender from the bottom.
-
-
-
-
Using your fingers, remove the mid-frame.
-
-
-
Use a plastic opening tool to disconnect the front and rear cameras from the motherboard.
-
Remove the cameras from the phone.
-
-
-
Using a plastic opening tool, pry up the front facing speaker and remove it from the phone.
-
-
-
Disconnect the LCD from the motherboard with a plastic opening tool.
-
-
-
Use a plastic opening tool to pry up the motherboard form the display housing.
-
Remove the motherboard from the phone.
-
-
-
Use your fingers to remove the flex cables from the phone.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935227:0crwdne2935227:0
crwdns2915084:0crwdne2915084:0
USF Tampa, Team S1-G3, Nance Spring 2018 crwdns2935289:0USF Tampa, Team S1-G3, Nance Spring 2018crwdne2935289:0
USFT-NANCE-S18S1G3
crwdns2931471:04crwdne2931471:0
crwdns2935297:020crwdne2935297:0
