crwdns2915892:0crwdne2915892:0
In this step-by-step guide, you will be able to successfully replace your motherboard in your LG Optimus F3 device.
crwdns2942213:0crwdne2942213:0
-
-
Turn the device so that the back faces up.
-
Remove the back case by pushing up on the back and pulling down on the face as illustrated in the image.
-
-
-
Remove the battery by flipping the bottom edge upward to separate the battery from the case.
-
-
-
Remove 10 1.0 mm screws located on the back of the device.
-
-
-
-
Use the plastic opening tool to separate the inner case from the device.
-
Wedge the plastic opening tool between the case.
-
Wiggle the tool and use leverage to pry the case apart.
-
-
-
Use the plastic opening tool to separate the camera from the motherboard.
-
Wedge the plastic tool between the camera and the motherboard to loosen the camera unit.
-
-
-
Use a pair of tweezers to disconnect and remove the rear facing camera.
-
-
-
Use the plastic opening tool to separate the sim card and the memory card connector from the motherboard.
-
Wedge the plastic tool to lift up the sim-memory unit from the motherboard.
-
-
-
Use the plastic opening tool to remove the charging port unit.
-
Wedge the plastic opening tool between the charging port unit and the motherboard to separate the port.
-
-
-
Use the plastic opening tool to remove the motherboard located directly above the battery encasement.
-
Wedge the plastic opening tool between the circuit board and the motherboard to separate the unit.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:03crwdne2935229:0
crwdns2915084:0crwdne2915084:0
UMass Dartmouth, Team 1-5, Miles Fall 2015 crwdns2935289:0UMass Dartmouth, Team 1-5, Miles Fall 2015crwdne2935289:0
UMASSD-MILES-F15S1G5
crwdns2931471:03crwdne2931471:0
crwdns2935297:05crwdne2935297:0
